Click to enlarge |
TRUST Greddy Suction kit for the RB26DETT to convert your stock piping to polished aluminum and use the AIRINX filters with the Stock, Nismo or Nissan 80mm Z32 MAF sensors. This will work with the stock turbines, N1 turbines, T517Z, T518Z and T618Z turbines. Suitable for R32, R33 and R34 GTR models. Greddy state that their Airinx Air Intake Kits, are complete vehicle specific systems. They are broken down into two main types. One is a simple to install Airinx combination with a one-piece molded internal funnel and pipe or airflow meter adapter. The second type adds smooth flowing mandrel-bent aluminum piping to improve air flow response, and in some case relocation of the air filter for better performance. The AY-SB and AY-MB Airinx air filters are made with a special dry element and then placed between our new dual chrome ABS spiral cages. Our special double-ply element uses 2 layers of 3 dimensional urethane foam (with different textures) to increase filtration and maximize intake airflow. The outer ply has a large opening while the inner rough layer is made up of a fine foam. The outer cage is a spiraled straight-fin design which helps promote air intake. The chrome finish can dress up any high performance engine compartment and is available in two compact sizes. Numerous funnel adapters in different sizes and styles and an extensive line of application specific bolt on kits. Product Code 12020902 - Z32 AFM
- 2 x Airinx AY-SB
- AFM adapter NS-07 (Z32 AFM )
- Suction tube
- Suction alloy elbow No 77 - 65 - 80 mm
- R suction allow elbow No 78 - 65 - 80mm
- Each pipe suction return recirclation buff type
- Compression tube. Allow Elbow No 79 - 60mm Flange attached
- Alloy 60mm/ Alloy 60mm x 2 - 80mm each Buff finish
- Recirculation hose Z32 AFM, Transform connector adapter
- Short parts kit
- Can be used with a N1 or T517Z aftermarket turbo with Z32 AFM`s
- May require relocation of power steering oil reservoir
Product Code 12020903 - Standard AFM
- 2 x Airinx AY-S
- AFM adapter NS-01 (Standard AFM and Nismo AFM)
- Suction tube
- Suction alloy elbow No 77 - 65 - 80 mm
- R suction allow elbow No 78 - 65 - 80mm
- Each pipe suction return recirculation buff type
- Compression tube. Allow Elbow No 79 - 60mm flange attached
- Alloy 60mm/ Alloy 60mm X 2 - 80mm each Buff finish
- Genuine/Standard AFM use only
- Includes short parts kit
- Can be used with a N1 or T517Z aftermarket turbo
- May require relocation of power steering oil reservoir
PLEASE USE DROP DOWN BOX TO SELECT PRODUCT CHOICE.
| Product Code | |
|
[ekm]146x115[ekm].jpg)
